Nanlux Evoke 150C Full Color Nebula 8 Spot Light
The Nanlux Evoke 150C Full Color Nebula 8 Spot Light is an ideal choice for a lighting setup that requires an all-in-one full-colour fixture without an external ballast. Developed for a wide range of situations, the lamp's broad colour balance — from 1,000 to 20,000K — is supported by an extensive +/- 200 green/magenta tint shifting. Behind this advanced functionality sits the Nebula C8 8-chip light engine, which combines deep red, red, amber, lime green, green, cyan, blue and indigo LEDs for the most vivid colours.
The Evoke 150C runs on AC/DC power and features a wide range of reliable control methods: on-board, DMX/RDM, LumenRadio CRMX, app, and optional wireless/wired remote controls. Finally, the Evoke 150C is built around an IP66-rated housing for protection against all weather conditions.
The Evoke 150C's Nebula C8 technology uses a reliable 8-chip light source and produces bright, accurate illumination for a variety of scenarios. This means deep saturation, warm CCT and a wide colour gamut with eight coloured LED emitters. The Evoke 150C features advanced light-mixing technologies that ensure accuracy across CCT changes from 1,000K up to 20,000K. Thanks to its compact form factor and lightweight design, the Evoke 150C delivers an impressive light output of 22,230 lux at 1 metre with the included 45° reflector.
Light with confidence at all times — whether you're dimming or running at full intensity. The Evoke 150C offers 0–100% dimming in 0.1% increments for smooth fade and seamless adjustments. CRI 96, TLCI 97, SSI 78 at 5,600K and SSI 86 at 3,200K are high values that demonstrate accurate colour rendering, translating into pleasing skin tones. In addition, there are 15 built-in effects: CCT loop, INT loop, HUE loop, flash, pulse, storm, police car, TV, paparazzi, candle/fire, disco, broken bulb, fireworks, explosion and welding.
Nanlux offers a wide choice of methods to control the Evoke 150C, with both wired and wireless control for simple or complex sets. Dimming and other adjustments can be made locally, via DMX/RDM, or using other advanced options. These control options include: intuitive control via the Nanlink app or wirelessly via Bluetooth, DMX control with an optional DMX console, wireless DMX via LumenRadio CRMX, or optional WS-RC-C2 wireless and WC-EXT wired remote controls. The optional AS-EXT-LAN adapter also supports Ethernet control using the ArtNet/sACN protocols. NFC functionality enables quick control via the app.
One of the key highlights of this fixture is its convenient all-in-one design, with no external ballast required. A single cable connects to a single port for both AC and DC power. Power options are AC 100–240 V, plus DC 14.4–28 V or PD3.0 12–28 V. Use it anywhere with standard extension leads plugged into a mains socket, or with optional D-tap batteries. To prevent the lamp from overheating, this fan-cooled fixture offers five different modes: smart, full speed, low speed, pause and off.
